Package Included: TV Mount, Matching Screws, Instructions

Purchase Orientation:
1. Product Size, Weight and Load-Bearing:
LCD-146 arm mount size is about 16.6in x 3.1in x 9in,
net weight is about 4 pounds,
display weight should be less than 44 pounds.

2. Installation Hole Spacing:
Suitable for 3in x 3in / 4in x 4in / 8in x 4in according to VESA standard.
(check VESA and weight before installation)

3.Fit for 26 / 42-Inch TV:
Check the back of the TV for four mounting holes (VESA hole mounting)
and check whether the VESA and stud spacing can block the input.
(i.e., the extension, insertion, and pull-out of the power cord)

4.Excellent Material:
The full motion tv mount is made of high grade cold-rolled steel.
It is strong, durable and wear-resistant, and will not easily damage the coating.

5.Operation Tools:
Electric drill, drill bit, ruler, pencil, screwdriver, horizontal ruler.

Attention:
1. Before installing, please check the TV mounting connector (VESA) on the back
of the TV, the weight of the TV and the position of the wall stud to determine
whether the TV wall bracket is suitable for your TV and wall position.

2. Please note in particular that the provided wall anchors are suitable
only for concrete and brick walls.

3. The wall mount may not be mounted above locations where persons might linger.

4. Once you have mounted the bracket and the flat panel display
check that they are sufficiently secure and safe to use. You should
repeat this check at regular intervals (at least every three months).

5. Do not place loads on the articulating wall mount that are heavier than
the load bearing capacity specified and do not exceed the specified maximum size.

After purchase, please read the instructions carefully.

Product Features

• [COMPATIBILITY AND FIRMNESS]: Our arm mounts are suitable for most 26 inch – 42 inch televisions with a maximum load-bearing capacity of 20KG and maximum VESA (mounting hole spacing) of 200mm x 100mm.
• [OPTIMAL ANGLE OF VIEW]: The LCD-146 wall mount can be rotated by 150° between the rod and panel, 240° between the rod and bar, and 90° at a tilt angle to reduce glare and enhance the home television viewing experience.
• [SPACE-SAVING] This fully dynamic wall mount TV bracket can be adjusted and stretched to a maximum of 16.6 inches which saves you some valuable space and makes your house look neat and spacious.
• look neat and spacious. [EASY TO INSTALL]: With detailed installation instructions, a complete set of mounting screws can be put into place in one step. The anchors we provide apply only to concrete and brick walls.
• [STABILITY AND SAFETY]: Machine welding technology makes the whole flat screen TV wall mount unit strong and safe. Easy adjustment of inclination by a tool-free spring handle.