Package: TV Mount, Matching Screws, Instructions

Purchase Orientation:
1.Size, Weight and Load-Bearing:
LCD-271 TV bracket size is about 13.6in x 7.9in x 7.9in,
net weight is about 2 pounds,
display weight should be less than 30 pounds.

2.Installation Hole Spacing:
Suitable for 3″ x 3″ / 4″ x 4″ / 4″ x 8″ / 8″ x 4″ / 8″ x 8″ according
to VESA standard. (check VESA and weight before installation)

3.Fit for 26 – 55 inch TV:
Check the back of the TV for four mounting holes(VESA hole mounting)
and check whether the VESA and stud spacing can block the input.
(i.e., the extension, insertion, and pull-out of the power cord)

4.Excellent Material:
The full motion TV mount is made of high grade cold-rolled steel.
It is strong, durable and wear-resistant, and will not easily damage the coating.

5.Operation Tools:
Electric drill, drill bit, ruler, pencil, screwdriver, horizontal ruler.

Attention:
1. Before installing, please check the TV mounting connector (VESA) on the back
of the TV, the weight of the TV and the position of the wall stud to determine
whether the TV wall bracket is suitable for your TV and wall position.

2. Please note in particular that the provided wall anchors are suitable
only for concrete and brick walls.

3. The wall mount may not be mounted above locations where persons might linger.

4. Once you have mounted the bracket and the flat panel display
check that they are sufficiently secure and safe to use. You should
repeat this check at regular intervals (at least every three months).

5. Do not place loads on the articulating wall mount that are heavier than
the load bearing capacity specified and do not exceed the specified maximum size.

After purchase, please read the instructions carefully.

Product Features

• [COMPATIBILITY AND FIRMNESS]: Our wall mount TV brackets are suitable for most 26inch – 55inch televisions with a maximum load-bearing capacity of 13.6KG, maximum VESA (mounting hole spacing) of 200mm x 200mm. There are made of high quality cold-rolled steel material, and offers strong durability.
• [OPTIMAL ANGLE OF VIEW]: the LCD-271 wall mount can be rotated by 180° between the rod and panel, 270° between the rod and bar, and 15° at the tilt angle to reduce glare and enhance the home television viewing experience.
• [SPACE-SAVING] This fully dynamic flat screen TV wall mount can be adjusted and stretched to a maximum of 13.6 inches which saves you some valuable space and makes your house look neat and spacious.
• [EASY TO INSTALL]: With detailed installation instructions, a complete set of mounting screws can be put into place in one step. The anchors we provide apply only to concrete and brick walls.
• [STABILITY AND SAFETY]: Machine welding technology makes the whole TV mount articulating unit strong and safe. Easy adjustment of inclination by tool-free spring handle.